存檔 | 收藏
點閱數:4,133
[綜合討論] TDCI機油,Ford WSSM2C934-B及ACEA C1認證
無頭像
   ykkhann

腳踏車魔人
文章 34
用戶失蹤天數 4
點數 24   戰績 0   改裝 1   故障 4
其他 
發表於 2015-12-8 08:25 PM 
最近找到Shell Helix Ultra Professional AF-L 5W-30,符合Ford WSSM2C934-B,而且也有ACEA C1認證,可以保護DPF,價錢也便宜,有人用過嗎??
請您分享一下,謝謝。

http://www.shell.com/global/prod ... -pro-af-l-5w30.html


 
   戴奧辛 (388,000公里 )

Focus ST
文章 5766
用戶失蹤天數 1465
點數 237   戰績 24   改裝 1   故障 4
臺南市 白河區 
發表於 2015-12-8 08:41 PM 
有用過C1,感覺油耗有比較好
5公升裝哪有賣?


不離不棄 
   creamy ( )

250cc
文章 379
用戶失蹤天數 723
點數 220   戰績 142   改裝 0   故障 0
其他 來自 天空
發表於 2015-12-8 08:50 PM 
用了1箱了  1瓶1L的, 輕快些, 便宜, 5000km過 換一次, ok啦


有問題 問問題 能學些 多學點 
   vicredall (vic chang)

Focus 1.8
文章 2878
用戶失蹤天數 0
點數 1305   戰績 12   改裝 57   故障 19
宜蘭縣 宜蘭市 來自 故鄉>宜蘭
發表於 2015-12-8 09:57 PM 
我今年也買了一箱回來用
水貨一罐250元左右,不算貴!
用起來和TOTAL NFC沒什麼差異,我都七千公里換機油


 
無頭像
   ykkhann

腳踏車魔人
文章 34
用戶失蹤天數 4
點數 24   戰績 0   改裝 1   故障 4
其他 
發表於 2015-12-8 10:23 PM 
我的車是mk3 9w, 一般都是10000換油,去買了5罐預訂下週更換,會注意到是因為這支油有福特934B和C1認證。

先前用Aral Super Tronic Longlife III 5W30,有C3認證但沒有福特的認證。其實還不錯。

換換口味試試。


 
無頭像
   ymaychen

腳踏車魔人
文章 22
用戶失蹤天數 20
點數 13   戰績 0   改裝 0   故障 0
臺南市 新營區 
發表於 2016-1-10 04:16 PM 
昨天做了3萬保養, 順便換了這款油, 感覺比Agip Tech-F輕一些, 毛邊少了些


 
   loveknight144

150cc
文章 303
用戶失蹤天數 812
點數 62   戰績 18   改裝 0   故障 4
屏東縣 屏東市 
發表於 2016-1-10 06:01 PM 
A/B: gasoline and diesel engine oils

ACEA A1/B1 Stable, stay-in-grade oil intended for use at extended drain intervals in gasoline engines and car & light van diesel engines specifically designed to be capable of using low friction low viscosity oils with a high temperature / high shear rate viscosity of 2.6 mPa*s for xW/20 and 2.9 to 3.5 mPa.s for all other viscosity grades. These oils are unsuitable for use in some engines. Consult owner manual or handbook if in doubt.

ACEA A3/B3 Stable, stay-in-grade oil intended for use in high performance gasoline engines and car & light van diesel engines and/or for extended drain intervals where specified by the engine manufacturer, and/or for year-round use of low viscosity oils, and/or for severe operating conditions as defined by the engine manufacturer.

ACEA A3/B4 Stable, stay-in-grade oil intended for use in high performance gasoline and direct injection diesel engines, but also suitable for applications described under A3/B3.

ACEA A5/B5 Stable, stay-in-grade oil intended for use at extended drain intervals in high performance gasoline engines and car & light van diesel engines designed to be capable of using low friction low viscosity oils with a High temperature / High shear rate (HTHS) viscosity of 2.9 to 3.5 mPa.s. These oils are unsuitable for use in some engines. Consult owner manual or handbook if in doubt.

C: Catalyst compatibility oils

ACEA C1 Stable, stay-in-grade oil intended for use as catalyst compatible oil in vehicles with DPF and TWC in high performance car and light van diesel and gasoline engines requiring low friction, low viscosity, low SAPS oils with a minimum HTHS viscosity of 2.9 mPa.s. These oils will increase the DPF and TWC life and maintain the vehicles fuel economy. Warning: these oils have the lowest SAPS limits and are unsuitable for use in some engines. Consult owner manual or handbook if in doubt.

ACEA C2 Stable, stay-in-grade oil intended for use as catalyst compatible oil in vehicles with DPF and TWC in high performance car and light van diesel and gasoline engines designed to be capable of using low friction, low viscosity oils with a minimum HTHS viscosity of 2.9mPa.s. These oils will increase the DPF and TWC life and maintain the vehicles fuel economy. Warning: these oils are unsuitable for use in some engines. Consult owner manual or handbook if in doubt.

ACEA C3 Stable, stay-in-grade oil intended for use as catalyst compatible oil in vehicles with DPF and TWC in high performance car and light van diesel and gasoline engines, with a minimum HTHS viscosity of 3.5mPa.s. These oils will increase the DPF and TWC life. Warning: these oils are unsuitable for use in some engines. Consult owner manual or handbook if in doubt.

ACEA C4 Stable, stay-in-grade oil intended for use as catalyst compatible oil in vehicles with DPF and TWC in high performance car and light van diesel and gasoline engines requiring low SAPS oil with a minimum HTHS viscosity of 3.5mPa.s. These oils will increase the DPF and TWC life. Warning: these oils are unsuitable for use in some engines. Consult owner manual or handbook if in doubt.


Ford Oil Specifications

Motor Oils

Ford WSS-M2C913-A
Engine oil, Initial and service fill, SAE 5W-30. This specification meets the ILSAC GF-2 and ACEA A1-98 and B1-98 and additional Ford requirements.
Ford WSS-M2C913-B
The Ford M2C913-B specification is released in Europe for initial fill engine oils used for lubrication of spark ignition engines using gasoline and for compression ignition engines using diesel fuels. The specification is also used to define engine oils for servicing Ford engines where applicable. The oil shall meet all the requirements of the ILSAC GF-2 and GF-3 specification, the ACEA A1-98 and B1-98 specification and additional Ford requirements.
Ford WSS-M2C913-C
Fully backwards compatible and is strongly recommended for all applications that currently require the specification Ford M2C913-B. The new engine oil provides various benefits to the customer such as improved fuel economy benefits and high robustness to biodiesel fuels.
Ford WSS-M2C913-D
Introduced in 2012, oils meeting this specification are recommended for all Ford diesel engines except Ford Ka TDCi models manufactured before 2009 and Ford Galaxy 1.9 TDi models manufactured between 2000 and 2006. A product meeting this specification is especially recommended for diesel engines where M2C913-B or M2C913-C oils were initially required. An oil meeting this specification must be used in Ford Transit vehicles manufactured from 2012 onward with Duratorq 2.2 engine. Oils meeting this specification can be used with extended oil change intervals and are also suitable to be used in engines running on biodiesel or high sulfur diesel.
Ford WSS-M2C917-A
Viscosity SAE 5W40 engine oil for pump injector diesel engines.
Ford WSS-M2C934-A
Extended drain engine oil for vehicles equipped with diesel particulate filter (DPF).
Ford WSS-M2C937-A
Special engine oil for Ford Focus RS. Viscosity should be SAE 0W-40.
Ford WSS-M2C948-B
Largely based on the ACEA C2 oil sequence this spec requires a low SAPS 5W20 oil and is primarily designed for the 1.0 liter, 3-cylinder EcoBoost engine. Contains in-house tests for fuel economy and piston deposit control. Oils meeting this spec must provide a 0.9% fuel economy improvement over regular 5W-20 oils.
Ford WSS-M2C950-A
Special engine oil for Ford Focus Diesel 2.0 manufatured from September 2014 and Ford Mondeo Diesel 2.0 manufactured from 2015. Viscosity should be SAE 0W-30.

用google翻譯一下,大概就了解大概囉~~


 
無頭像
   ymaychen

腳踏車魔人
文章 22
用戶失蹤天數 20
點數 13   戰績 0   改裝 0   故障 0
臺南市 新營區 
發表於 2019-11-9 04:58 PM 
Ford WSS-M2C950-A
Special engine oil for Ford Focus Diesel 2.0 manufatured from September 2014 and Ford Mondeo Diesel 2.0 manufactured from 2015. Viscosity should be SAE 0W-30.

請問這支油有人用過嗎? 可以用在MK3 TDCI嗎? 有點想換口味了


 




加入贊助商  |  免責聲明  |  聯絡我們