存檔 | 收藏
點閱數:9,238
[技術資料] 機油壽命監控系統
   nywang1219 (老王)

腳踏車魔人
文章 42
用戶失蹤天數 1086
點數 9   戰績 0   改裝 0   故障 0
新北市 新店區 來自 新店
發表於 2014-7-16 02:53 PM 
剛剛在友站及友版看到, focus mk3跟kuga一樣有機油壽命監控系統
這樣的話是不是以後就照這個的提醒去換機油就好?
省下一些換機油的錢XD
附上友站截圖:

附上參考連結:
http://www.focus-sport.club.tw/viewthread.php?tid=418363&extra=page%3D2
http://www.carclub.tw/viewthread.php?tid=682


 
   棗子

重機
文章 485
用戶失蹤天數 886
點數 74   戰績 0   改裝 0   故障 0
屏東縣 屏東市 
發表於 2014-7-16 03:12 PM 
他有說這只是用數學模型去推算的結果
可供參考啦~
可以試試照電腦的建議去保養,然後去看機油漏出來後的顏色跟流動情形去判斷下次要不要照著電腦的建議去保養


 
無頭像
   kkeny

重機
文章 472
用戶失蹤天數 117
點數 271   戰績 0   改裝 0   故障 0
桃園縣 龍潭鄉 
發表於 2014-7-16 04:20 PM 
保固內需依照手冊 最少半年或一萬公里(先到者為準)
一定要回原廠交保護費 不然是會破保的

至於過保之後 什麼時候換 都可以 只要你心臟夠大顆XD


 
   xr400jeremy (阿興)

150cc
文章 337
用戶失蹤天數 7
點數 132   戰績 0   改裝 0   故障 0
新北市 中和區 來自 台北
發表於 2014-7-16 04:25 PM 
請問,6W有這功功能嗎


 
   番羽卓八 (seven)

90cc菜籃族
文章 175
用戶失蹤天數 1717
點數 18   戰績 0   改裝 0   故障 0
屏東縣 竹田鄉 來自 屏東
發表於 2014-7-16 04:27 PM 
xr400jeremy 發表:
請問,6W有這功功能嗎

小弟也有這方面的疑問


 
無頭像
   freddy0914 (佛萊迪)

125cc
文章 252
用戶失蹤天數 962
點數 55   戰績 0   改裝 0   故障 0
彰化縣 田尾鄉 來自 TW
發表於 2014-7-16 06:31 PM 
原來有這提醒功能喔!
之前回廠保養,都未曾看過技師有
重設機油的監控程序耶!


 
無頭像
   anubis0822 (呆熊便當)

走路新手
文章 2
用戶失蹤天數 2912
點數 0   戰績 0   改裝 0   故障 0
彰化縣 福興鄉 
發表於 2014-7-16 09:52 PM 
關閉狀態  煞車 油門一起踩到底 過電門 過幾秒後 就會重新設定機油的測定了  沒記錯的話  螢幕會跳設定完成之類的


 
   allnewfocus9w

90cc菜籃族
文章 158
用戶失蹤天數 1633
點數 55   戰績 0   改裝 0   故障 0
桃園縣 中壢市 
發表於 2014-7-16 10:26 PM 
這有教學, 不過是英文的, 聽聽也沒這麼難懂啦...



 
   nywang1219 (老王)

腳踏車魔人
文章 42
用戶失蹤天數 1086
點數 9   戰績 0   改裝 0   故障 0
新北市 新店區 來自 新店
發表於 2014-7-16 11:02 PM 
把重設的步驟貼在這邊, 這樣大家應該比較容易了解!
Resetting the Oil Life Monitoring System
Note:Reset the oil life monitoring only after an oil change.
1. Turn the ignition key to the on position. Do not start the engine.
For vehicles with push-button start, press and hold the start button for two
seconds without pressing the brake pedal. Do not attempt to start the engine.
2. Press both the accelerator and brake pedals at the same time.
3. Keep both pedals fully pressed.
4. After three seconds, theService: Oil reset in prog.message will be
displayed.
5. After 25 seconds, theService: Oil reset completemessage will be
displayed.
6. Release both the accelerator and brake pedals.
7. TheService: Oil reset complete message will no longer be displayed.
8. Rotate the key to the off position.
For vehicles with push-button start, press the start button to turn the
vehicle off completely.


 
   saxo_fun0239 (Ryan Ge)

90cc菜籃族
文章 170
用戶失蹤天數 1464
點數 31   戰績 0   改裝 0   故障 0
臺中市 后里區 
發表於 2014-7-18 09:42 AM 
請問大大,哪時期以後的mk3才有這功能?


 




加入贊助商  |  免責聲明  |  聯絡我們