存檔 | 收藏
點閱數:1,709
[ST LINE] 呼叫牛博--DS limp mode reset 的操做步驟
   seth7 (老牛+牛伯)

遊客
文章 1741
用戶失蹤天數 4925
點數 0   戰績 0   改裝 0   故障 0

發表於 2007-7-23 11:04 PM 
Anyone hitting limp in Race+ should flash back to stock, disconnect the battery for about an hour and press the hazard lights while disconnected to discharge all memory. The reason for this is Race+ as the name goes makes so much more power the pcm sets a point after learning for a cumulative time of 5 seconds where limp will kick in and after this it's easier to hit limp protection mode. By removing the battery terminal as stated above all learned values are removed and the limp set point is re-set. After this if your pcm detects you are in an out of tollerance position for an accumulation of 5 seconds it will set a limp point again.
This is why some people go for months and then hit limp mode, it may have learned 1/2 a second values today, nothing tomorrow, 1 second next week etc until a total of 5 seconds and then limp protection kicks in.

We are working on a Race+ map with our dealers that removes limp completely but this will be at the customers own risk and discression as there will be no protection built in to the tune and would effectively go that little bit further.

I'll keep you updated on here as always


嘻皮萬歲! 米露跟草萬萬歲!! 
   seth7 (老牛+牛伯)

遊客
文章 1741
用戶失蹤天數 4925
點數 0   戰績 0   改裝 0   故障 0

發表於 2007-7-23 11:15 PM 
老牛的了解,基本上用Race+會進入保護程式是突然連續大腳,動力持續爆發的結果;電腦是以5秒的時間做為記憶點來學習,所以若避開這學習點,就比較不會進入保護程式,說穿了是車主開車的習性! 所以英國那邊,有人從沒進入保護程式,有人就經常,Race+主要還是用在賽場上!


 
   悍克

Focus ST
文章 10088
用戶失蹤天數 2828
點數 1   戰績 0   改裝 0   故障 0
新竹市 來自 K幫
發表於 2007-7-29 06:52 PM 
自上週斷電reset

跑過幾趟慢跑

果然沒有limp 限速

建議有被limp過的ds車友

嘗試英國推薦的處理方式


 




加入贊助商  |  免責聲明  |  聯絡我們