發表1) 插入鑰匙 (插入就好別轉動)
2) 按住旅程電腦的Reset鍵
3) 持續按住不放，轉動鑰匙開電門或發動
4) 大約10秒，螢幕會顯示"test" (儀錶版內的LCD) 然後可放開Reset鍵
5) 按Reset鍵可切換約15種檢 ...
| 9202 | Fuel sender open circuit |
| 9204 | Fuel sender short to ground |
| 9213 | Anti-theft number of programmed keys is below minimum |
| A103 | Antenna not connected-defective transceiver |
| 9232 | Antenna not connected-defective transceiver |
| 9317 | Battery Voltage high |
| 9318 | Battery voltage low |
| 9342 | ECU is defective |
| 9356 | Ignition run circuit open |
| 9364 | Ignition Start circuit open |
| 9600 | PATS Ignition Key Transponder Signal is Not Received - Damaged Key or non-PATSKey |
| 9601 | PATSReceived Incorrect Key-Code from Ignition Key Transponder (unprogrammed Encoded Ignition Key) |
| 9602 | PATS Received Invalid Format of Key-Code From Ignition Key Transponder (Partial Key Code) |
| 9681 | PATSTranceiver Signal is Not Received (Not Connected, Damaged, or Wiring) |
| A139 | PCM ID does not match between Instrument Cluster and PCM |
| A141 | NVM Configuration Failure (No PCM ID exchange between Instrument Cluster and PCM) |
| A143 | NVM memory failure |
| 5284 | Oil Pressure Switch Failure |
| D027 | SCP Invalid or Missing Data for Engine RPM |
| D041 | SCP Invalid or missing data for Vehicle Speed |
| D043 | SCP Invalid or missing data for Traction Control |
| D073 | SCP Invalid or missing data for engine coolant |
| D123 | SCP Invalid or missing data for Odometer |
| D147 | SCP Invalid or missing data for vehicle security |
| D262 | Missing SCP message. |
有些看不懂 ! 發表
發表 
AM 發表 